Freshly washed and sliced beets: Remove rocks and weeds before washing the beets. The washed beetroot is then cut into thin noodles, called shredded beet, and sent to the extraction system.
Sugar extraction: Soak in hot water to remove substances. The syrup is then heated, and lime and carbon dioxide are added to remove remaining impurities.
Making sugar (purification-crystallization-drying)-filtering, evaporating and concentrating, crystallizing and drying the purified fruit juice. It is then stored in a silo until it is packaged and shipped.
1. Beet Stacker
Due to the in-depth mechanized harvesting of sugar beets in recent years, it has brought convenience and also brought many inclusions into the pile of sugar beets, which caused the actual weight of the sugar beets to be too high after loading. At the same time, after the debris enters the beet stack, it causes the microbes to multiply. The beet has deteriorated before it enters the production line. Sometimes it will cause the loss of tens of thousands of tons of beet and cause great economic loss to the sugar factory.
This equipment solves the above problems well, and it has been effective for semi-trailer heavy trucks, medium trucks, agricultural vehicles, dump trucks, etc.
2. Sugar beet soil remover
3. Beet exudator
The sugar beet exudator produced by our company has three specifications of 1500T/D, 2000T/D and 3000T/D, with an over-production capacity of up to 20%. It is a horizontal continuous type (Dds type) and is the equipment of choice for beet sugar mills.
4. Sugar beet waste drum dryer system
This system is a system with a larger capacity. The actual production capacity can reach 4,700 tons per day. It has the characteristics of energy saving and environmental protection, high evaporation efficiency, high degree of automation, large production capacity and low failure rate.
5. Closed positive pressure high efficiency lime kiln
The closed positive-pressure high-efficiency lime kiln produced by our company has two types of vertical feeding and inclined bridge feeding. It adopts double-hat kiln seal structure with high kiln gas content and isobaric blast full positive pressure operation. The calcination efficiency is high, the rotating distributor cloth avoids partial burning, the spiral ash discharging machine continuously discharges the ash, and the star ash discharging machine discharges the ash uniformly. It adopts flameless electronic ignition and PLC control automatic feeding, which can save a lot of labor. The product specifications are 120m2, 200m2, 250m2, 270m2, 350m2, and 400m2, and can be specially designed according to user needs. The company provides a full set of equipment and technical training.
No comments:
Post a Comment